Loading ...
Loading ...
Loading ...
ENGLISH
13
PM Mode
• Power Off (Default): Set the normal DC off mode.
• Sustain Aspect Ratio: Identical to normal DC off mode except that the Switching IC remains on. On certain models,
this applies only to a specific input mode (DisplayPort) and has the same effect as Screen Off
Always in other input modes.
• Screen Off: Switches to Screen Off status when entering DPM, Auto Power Off (15 min, 4 hours), or Abnormal Shut
Down mode.
• Screen Off Always: Switches to Screen Off status when entering DPM, Auto Power Off (15 min, 4 hours), Off Time
Scheduling, or Abnormal Shut Down mode, or when there is input from the remote control's
Power button or the monitor's Off button.
• Screen Off & Backlight On: Partially turns on the backlight to keep the display at a proper temperature when in
Screen Off status.
NOTE
• In order for the screen to switch from Screen Off to On status, there must be input from the remote control's Power
or Input button, or the monitor's On button.
Power On Delay(0-250)
• This feature prevents overload by implementing a power-on delay when multiple monitor sets turn on.
• You can set the delay interval in the range of 0 to 250 seconds.
Power On Status
• Select the operating status of the monitor when the main power has turned on.
• You can choose from among PWR (Power On), STD (Standby), and LST (Last Status).
• PWR (Power On) keep the monitor powered on when the main power has turned on.
• STD (Standby) switch the monitor to Standby status when the main power has turned on.
• LST (Last Status) switches the monitor back to its previous status.
Wake On LAN
• Set whether to use Wake On LAN.
• You can set the feature to On or Off for each wired/wireless network.
• Wired: When set to On, the Wake On LAN feature is enabled, letting you turn the product on remotely through a
wired network.
• Wireless Network: When set to On, the Wake On LAN feature is enabled, letting you turn the product on remotely
through a wireless network.
Loading ...
Loading ...
Loading ...