Loading ...
Loading ...
Loading ...
32
OPERATION
Operating the Dryer
Press the POWER button to turn on the dryer. The cycle LEDs illuminate and a
signal sounds, if turned on.
3
Press the Hold to Start button to begin the cycle. The cycle can be paused at
any time either by opening the door or by pressing the Hold to Start button. If
the cycle is not restarted within 4 minutes, the dryer will shut off and the cycle
settings will be lost.
5
Turn the cycle selector knob in either direction until the LED for the desired
cycle is on. The preset temperature, dry level, and option settings for that cycle
will be shown. Default settings for the selected cycle can now be changed if
desired. Refer to the Cycle Setting and Options page for details.
4
NOTE
Not all options or modifiers are available on all cycles. A different chime will
sound and the LED will not come on if the selection is not allowed.
Load the dryer with the wet laundry from the washer. If the load is extra large,
you may need to divide it into smaller loads for proper performance and fabric
care.
2
If the lint filter has not already been cleaned, lift out the filter and remove the
lint from the last load. This will help ensure the fastest and most efficient drying
performance.
1
Lint Filter
OPERATION
When the cycle is finished, the chime will sound if it is set. Remove your
clothing from the dryer immediately to reduce wrinkling. If WRINKLE CARE
is selected, the dryer will tumble briefly every few minutes to help prevent
wrinkles from setting in the clothes.
6
MFL69306261_en_170804.indd 32 2017.8.4 9:38:19 AM
Loading ...
Loading ...
Loading ...