Loading ...
Loading ...
Loading ...
17
Note about using the product
Points to be aware of when using the
product
•
Make sure that the dustbin lid is on prior to using
the product. Otherwise, the suction strength will
deteriorate and cleaning will not be satisfactory.
•
Support the bottom of the product when cleaning an
elevated surface.
•
When leaving the product unattended or unused for
an extended period, make sure to place it properly on
the charging station or lie it on the floor. Otherwise,
the product may fall and get damaged or cause an
injury.
•
Make sure that the exhaust filter is properly
assembled before using the product.
•
Environmental conditions such as temperature
and humidity may cause static to accumulate on
the product. Please contact the customer service
department of LG Electronics if the problem persists.
•
Any foreign object on the inlet port or extension pipe
will prevent the product from functioning properly.
Make sure to remove any foreign object such as a sock
or stocking before using the product.
•
The battery runtime will be shortened after using the
product repeatedly for an extended period due to its
characteristics.
•
When the battery is about to become fully run down
during use, the last block on the battery indicator will
start to flash and the product will power off after a
while. Fully charge the battery in this case.
•
Please use the product at normal room temperatures
as the battery runtime will deteriorate severely if used
at temperatures lower than 5
℃
or higher than 38
℃
for an extended period of time.
•
Refer to Product specifications for battery run time
details.
•
These times are a guide only and may be less
depending on the surface type.
•
It is recommended to swap the battery on the main
body and the battery on the auxiliary charging station
regularly for maintaining the maximum life of the
batteries. (For dual-battery models only)
Using the Product
1
Assemble the body, extension pipe, inlet port, and
battery in that order.
Inlet port
Extension pipe
Battery
Product
body
2
Press the button on the extension pipe to adjust its
length.
•
The pipe has 4 extendable length positions
Pipe length
extension button
3
Attach the accessory tool to the body or the
extension pipe.
Extension pipe
CAUTION
•
Prolonged use of the product with the accessory tool
attached may overheat the motor.
•
Using the inlet port to clean a TV, monitor or LCD
display may scratch the screen.
•
Exercise caution to avoid getting your finger stuck in
any gap when assembling the attachments.
•
If any foreign object is sucked into the inlet during
cleaning, operation of the vacuum cleaner might stop
in order to prevent damage to the body or motor.
Immediately stop using the vacuum cleaner and
remove the object before resuming cleaning.
HOW TO USE
Loading ...
Loading ...
Loading ...