Loading ...
Loading ...
Loading ...
45
GB
Getting Started
You can switch the usage of the speaker(s)
connected to the SURROUND BACK/
FRONT HIGH/ZONE 2 terminals in
accordance with the intended use. Be sure to
set “Sur Back Assign” before you perform
auto calibration.
1 Press MENU.
The menu is displayed on the TV screen.
2 Press V/v repeatedly to select
“ Settings,” then press or
b.
The Settings menu list appears on the TV
screen.
3 Press V/v repeatedly to select
“Speaker,” then press .
4 Press V/v repeatedly to select
“Sur Back Assign,” then press
.
5 Press V/v repeatedly to select
the parameter you want, then
press .
6 Press RETURN/EXIT O.
Note
This setting is available if the speaker pattern is set
so that there are no surround back speakers and no
front high speakers.
You can select the front speakers you want to
drive.
Press SPEAKERS (A/B/A+B/OFF)
repeatedly to select the front
speaker system you want to drive.
You can confirm which set of terminals (A or
B) are selected by checking the indicators in
the display window.
Note
This setting is not available when headphones are
connected.
Setting the surround back
speakers
Parameter Explanation
OFF The SURROUND BACK/
FRONT HIGH/ZONE 2
terminals can be used for a
surround back speakers or
front high speakers
connection.
BI-AMP The SURROUND BACK/
FRONT HIGH/ZONE 2
terminals can also be used
for a bi-amplifier
connection (page 104).
ZONE2 The SURROUND BACK/
FRONT HIGH/ZONE 2
terminals can also be used
for a zone 2 connection
(page 90).
Selecting the front speakers
Indicators Selected speakers
SP A The speakers connected to the
FRONT A terminals.
SP B The speakers connected to the
FRONT B terminals.
SP AB The speakers connected to both the
FRONT A and FRONT B
terminals (parallel connection).
“SPK OFF” appears in the display
window.
No audio signals are output from any
speaker terminals, or the PRE OUT
jacks.
SPEAKERS (A/B/A+B/OFF)
Loading ...
Loading ...
Loading ...