Loading ...
Loading ...
Loading ...
4
English Français Deutsch Italiano Español
日本語 中文
Assembly
Step 1:
Setting Up the Product
TOP
T
OP
T
O
P
T
OP
TOP
C
D
E
E
D
F
G
G
A
H H
• Remove the protective covers
H
from the shelves
A
and dispose of them.
• Screw one caster
D
/
E
into the bottom of each lower pole
C
and fasten it
using the wrench
F
. Position them as shown in the illustration.
• Attach one half of the plastic sleeve
G
to each lower pole. Then attach the other
half of the plastic sleeve to each lower pole, so both halves are connected with
each other. The arrow above the TOP marks on the plastic sleeves should point
upwards. Four plastic sleeves are necessary to support one shelf.
If preferred,leveling feet can be used instead of casters for a static shelving unit.
•
Remove all items from shelving units and disassemble shelving unit before switching
between casters and leveling feet.
J
Loading ...
Loading ...
Loading ...