Loading ...
Loading ...
Loading ...
ENGLISH
24
4
Use the (left) and (right) buttons to set the distance from the surround back speakers to the listening
position.
11 S.BACK 10ft
• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
Press the ENTER or (down) button to enter the setting and switch the DIGITAL input (COAX) setting.
NOTE:
• No setting when “None” has been selected for the surround back speakers.
• This is not displayed either when ZONE 2 is set with the POWER AMP ASSIGN switch on the main unit’s rear panel. (See page 4)
Setting the Digital In assignment
Input the type of components connected to the digital input terminals.
1
Use the (left) and (right) buttons to assign the input function connected to the COAXIAL input
(COAXIAL) terminal.
12 COAX CD
CD DVD TV VCR1 VCR2 TAPE OFF
• Select “OFF” if nothing is connected.
Press the ENTER or (down) button to switch the optical input 1 (OPT1) setting.
(left) button (right) button
2
Use the (left) and (right) buttons to assign the input function connected to the OPTICAL 1 input
(OPTICAL 1) terminal.
13 OPT1 DVD
CD DVD TV VCR1 VCR2 TAPE OFF
• Select “OFF” if nothing is connected.
Press the ENTER or (down) button to switch the optical input 2 (OPT2) setting.
(left) button (right) button
(Initial)
(Initial)
3
Use the (left) and (right) buttons to assign the input function connected to the OPTICAL 2 input
(OPTICAL 2) terminal.
14 OPT2 TV
CD DVD TV VCR1 VCR2 TAPE OFF
• Select “OFF” if nothing is connected.
Press the ENTER or (down) button to switch the optical input 3 (OPT3) setting.
(left) button (right) button
(Initial)
Loading ...
Loading ...
Loading ...