Loading ...
Loading ...
Loading ...
EN
MaCave Using the device
33
✓ The display flashes while you make the setting.
✓ The set value is saved after 6 seconds without a button being pressed.
✓ Once you have set the temperature, the display shows the current tem-
perature of the interior.
I
Pull-out shelves
The shelves can be pulled out by a third so that you can reach the wine bot-
tles easily. The shelves have a limit stop to prevent them from being pulled
out too far.
➤ Make sure that the door is fully open when you pull out the shelves on
roller-bearings. Otherwise the door seal can be damaged.
8.4 Procedure in the event of a power failure or if
absent
I
Power failure
A short circuit will not unduly affect the inner temperature as long as you do
not open the door too frequently.
If the power is off for a long time, carry out the appropriate action to protect
the contents of your wine refrigerator.
Short periods of absence
➤ Leave the device operating if you are absent for less than 3 weeks.
NOTE
When using the appliance for the first time or if it has not been
used for a long time, the inner temperature could differ from the
one you have set.
The temperature display flashes as long as this is the case.
Once the set temperature has been reached, the temperature dis-
play glows constantly.
NOTE
In the event of an interruption to the power supply (power failure,
switch over) the unit saves the previous temperature settings.
Loading ...
Loading ...
Loading ...