1
2
3
4
5
6
3
Sec.
Wahl
®
Heated Foot Massager Quickstart Guide
part no:
58415
Additional information available at massagers.wahl.com or 1-800-767-9245.
Insert adaptor jack into the plug on the right
side of the unit. Plug into a AC 120-volt outlet.
Place foot massager on floor in front of chair
or sofa. Use removeable kickstand if desired.
To turn the unit on, press the power button on
the left side once.
To change the programs, press the power
button. Select from multiple settings by
pressing the programs button successively
until desired program is found.
To turn the heat on, press the heat button
once. Press again to turn heat off. The heat will
not turn on until the power button has been
pressed.
To turn the unit off, hold the power button for
3 seconds. This unit automatically turns off
after 20 minutes.
4 Programs4 Programs
Power On/Off
& Programs
Button
4 Massage
Nodes
Heat
Coils
Heat
Button
Removeable
Ergonomic
Kickstand
Plug for
Adaptor Jack
Programs
#1: Straight Vibration —
All motors vibrate
#2: Wave — All motors
vibrate slowly, gradually
getting faster, then left and
right sides alternate three
times, vibrating slow to fast,
then the program repeats
#3: Pulse — pulses of
vibration get gradually
faster
#4: Left & Right Rotate —
alternates vibration
Caution: To avoid injury and
damage to the product,
always use this while
seated. Never stand on the
unit.
*It is highly recommended
not to use bare feet on this
unit. Also, do not use the
unit with shoes on.
Wahl
®
Heated Foot Massager Key Features
Adaptor Jack
Adaptor
(Operates on
120V, 60HZ Only)
If you are not satisfied with your Wahl Heated Foot Massager, please feel free to contact us at massagers.wahl.com or 1-800-767-9245.
