Loading ...
Loading ...
Loading ...
13
OPERATION PROCEDURE
NOTE: The QR code used for microwave oven setup is attached inside
the product. Please open the door and scan the QR code to the
right of a key image on the front side of the product.
6. If the Wi-Fi icon stops blinking and is off after 5 minutes, reset the microwave oven by pressing and holding the
STOP/CLEAR and number 1 pads simultaneously for 5 seconds and restart from the step 5.
Pairing Method 3: User Guided Setup (UGS)
If the QR code on the device is lost or has been damaged and you cannot use Pairing Method #2, you can set up your
microwave and connect to Alexa using User Guided Setup (UGS).
1. Install the latest version of Alexa app on your smart device and login with your Amazon account.
2. Open the Alexa App, tap the Devices icon in the lower right, and tap the “+” icon in the top right. Select “Add
Device” and “Microwave” to begin set up for your microwave oven. Follow on-screen instructions.
3. When a screen with 2D Barcode appears, Press DON’T HAVE A BARCODE to continue setup.
4. And then, follow the on-screen instructions to set up your microwave oven.
a. Plug the microwave oven into a power outlet that is grounded.
b. Ensure that Home Wi-Fi is on.
c. Press and hold the STOP/CLEAR and number 5 pads simultaneously for 5 seconds. “UGS” will
appear on the microwave LED display for 2 seconds. The Wi-Fi icon will start blinking rapidly.
d. Press NEXT to continue setup.
5. If the Wi-Fi icon stops blinking and is off after 5 minutes, setup times out. Restart from the step 4.c.
When "DONE"
shows on the microwave LED display and the beep sounds, set up is complete.
After set up, the LED display will turn on the Wi-Fi icon and show local time in your location.
NOTE: It may take a few minutes for the LED display to show the correct local time.
Once set up is completed, it is automatically set up even after turning the power of the oven off and on.
NOTE: When you delete the product from the Alexa app, you must set up again.
Loading ...
Loading ...
Loading ...