Loading ...
Loading ...
Loading ...
14
5
6
Use four 1/4-20×½" screws and four 1/4-20 flange nuts to attach the warming plate to the lid of firebox. Tighten securely.
Utilice cuatro 1/4-20 x ½ "rosca 1/4-20 y cuatro tuercas de la brida para sujetar la placa de calentamiento en la tapa de la cámara de
combustión. Ajuste con firmeza.
1/4-20
Flange Nut
Qty. 16
1/4-20
Brida de la Tuerca
Cant. 16
1/4-20x1/2”
Screw
QTY: 4
1/4-20x1/2”
Tornillo
Cant: 4
Firebox Top
Fuego Tapa de la Caja
Make sure that leg bolts are tight enough so that legs won't slip off of posts. With the assistance of a helper, roll the unit over the handle brackets
and stand it up onto its legs. Once standing, fully tighten the four leg bolts against leg walls. Insert the tank exclusion right end into holes on the
bottom shelf. Then align the left end of the tank exclusion with holes on the long legs and slide into place. FULLY TIGHTEN THE FOUR LEG
BOLTS AGAINST LEG POST WALLS
Asegúrese de que los pernos de la pierna estén lo suficientemente apretados para que las piernas no se resbale de los postes. Con la ayuda de
un ayudante, rodar la unidad sobre los soportes del mango y colocarlo sobre sus patas. Una vez de pie, apriete completamente los cuatro pernos
de la pierna contra las paredes de las piernas. Inserte el extremo derecho de exclusión del tanque en los orificios del estante inferior. A
continuación, alinee el extremo izquierdo de la exclusión del tanque con agujeros en las patas largas y deslícelo en su lugar. APRIETE
COMPLETAMENTE LOS CUATRO PERNOS DE LA PIERNA CONTRA LAS PAREDES DEL POSTE DE LA PIERNA
Loading ...
Loading ...
Loading ...