Loading ...
Loading ...
Loading ...
16
1
step
1
1
2
3
2
step
Legs are packed in cardboard top pack.
Note: Legs
should be installed near to where appliance is to be
used, as they are not secure for long transit.
Note: It is strongly recommended
that a pallet or lift jack be used rather than tilting. Raise
unit about a foot.
Unscrew shipping bolts from couplings on
all four corners
.
4
step
Lower range gently to keep any undue strain from
legs and internal mounting hardware.
3
step
Screw legs into couplings on all four corners. The 48” W.
ranges have two additional legs located in the center of
the unit.
Leg Installation
1
2
Measure the four corners in cutout area to verify
if flooring is level.
For uneven or sloped floors, level unit with metal
shims only, as the adjustment required may exceed
the thread available in the legs.
Leveling/Adjustments/Alignment
Loading ...
Loading ...
Loading ...