Loading ...
Loading ...
Loading ...
11
nitial set-up of your oven I
Setting the time of day
o When the oven is connected to your mains supply for the first time
(or after a power cut), the digits on the LED
display (7) will show
clock button (3) and the hour digits will flash on the LED
oven
so it is possible to adjust the hour digit
e time; it is possible
ress
he digits will flash and the time of day will
ructions above, as long as the oven is not
tion and set the thermostat to its maximum temperature
re that any windows in the room a
re left open
o remain in the room whilst the burning
ld leave the oven on maximum setting for 30 – 40
either a sponge or soft cloth. No abrasive
cleaners should be used.
“0:00” and there will be an audible signal.
Press theo
display.
o Turn the adjustment knob (6) to adjust the hour time. Your
has a 24 hour clock,
between 0 and 23.
When the correct hour time appears on the LED display, press the o
clock button again. The minute digits will flash on the LED display.
Turn the adjustment knob to adjust the minuto
to adjust the minute digit between 0 and 59.
When the correct minute time appears on the LED display, po
the clock button for a third time to confirm the time of day.
o The “:” symbol between t
light on the LED display.
IMPORTANT: You can adjust the time of day at any time by
following the inst
currently in use.
Before first use
o To remove any residue from the oven that may have been left from
the manufacturing process, you should select the convection & fan
oven func
setting.
o It is perfectly normal for a smell to be produced during this process.
You should make suo
during this process.
It is advisable for you not to
off process is taking place.
You shouo
minutes.
o After the oven cavity has cooled, it should then be cleaned with
warm soapy water, using
Loading ...
Loading ...
Loading ...