Loading ...
Loading ...
Loading ...
Basic Operation & Riding
71
(cont’d)
Braking
Your ATV is equipped with drum brakes on both front wheels which
are hydraulically activated by operating the front brake lever. A
single drum brake on the rear axle housing is mechanically activated
by depressing the brake pedal or operating the rear brake lever/
parking brake lever.
As a general rule, the front braking system provides about 70
percent of total stopping power.
For full braking effectiveness, use both the pedal and lever
simultaneously. Using both braking systems will stop your ATV faster
with greater stability.
To slow or stop, apply the brake lever and brake pedal smoothly,
while downshifting to match your speed.
Gradually increase braking as you feel the brakes slowing your
speed. The increase in engine compression from downshifting will
help slow your ATV.
Applying the brakes too hard may cause the wheels to lock and slide,
reducing control of your ATV. If this happens, release the brake
controls, steer straight ahead until you regain control, then reapply
the brakes more gently.
When possible, reduce your speed or complete braking before
entering a turn. Avoid braking or closing the throttle quickly while
turning. Either action may cause one or more wheels to slip and
reduce your control of your ATV.
19 TRX250TM1 (ED)-32HS06300.book 71 ページ ２０１８年４月２５日 水曜日 午前１１時３９分
Loading ...
Loading ...
Loading ...