Loading ...
Loading ...
Loading ...
Servicing Your Honda
136
Brakes
2.
Remove the inspection hole plug (2).
3.
Measure the lining thickness (3) on both front wheels:
If either lining is worn beyond the limit, both brake shoes must be
replaced by your dealer.
4.
If the brake lever freeplay and the brake shoe lining thickness are
within the recommended limits, reinstall the inspection hole
plugs, seating them into the inspection hole as shown.
5.
If the brake lever freeplay is excessive but the linings are not worn
beyond the service limit, adjust the brake lining clearance.
Standard: 4.0 mm (0.16 in)
Service Limit: 1.0 mm (0.04 in)
FRONT
(5)
(2) inspection hole plug (4) front brake drum
(2)
(3) lining thickness (5) front wheel rim
(4)
(2)
(3)
19 TRX250TM1 (ED)-32HS06300.book 136 ページ ２０１８年４月２５日 水曜日 午前１１時３９分
Loading ...
Loading ...
Loading ...