Loading ...
Loading ...
Loading ...
26
OVERLAY DOOR PANEL INSTALLATION - MA15C MODELS
Step 5: Drill necessary handle holes and
mount handle:
This is a convenient time to locate and drill the holes for
your handle. Most often the handle is to match that of the
surrounding cabinetry. If your handle attaches from the
back-side of the custom panel, locate the mounting holes
while the panel is attached to the door and cabinet. After
the panel is removed from the door, drill the mounting holes
from the front, to the recommended diameter of the handle
manufacturer. Counter bore the back-side of the panel so
the screw heads do not interfere with the surface of the
door.
Top hinge
adapter
Figure 43
Hole in
hinge
adapter
Door
Overlay
panel
Hole in bottom
hinge adapter
Step 6: Drill panel mounting holes
Re-clamp the panel to the door per step 5 and drill the
screw pilot holes for attaching the overlay panel to the door.
Select the size of the hole from Table A. Be careful not to
drill the pilot holes through the overlay panel,
1
⁄2" (12.7 mm)
deep for
3
⁄4" (19 mm) and
5
⁄8" (15.7 mm) panels.
Step 7: Secure overlay panel to the door.
With the #10 wood screws provided, fasten the overlay
panel to the door. (See Figure 44).
Material Type #10 Wood Screw
Hardwood
1
⁄8" (3.2 mm) Diameter Pilot Hole
Softwood
7
⁄64 (2.8 mm) Diameter Pilot Hole
Table A
Clearance hole through
door gasket channel
#10 Wood Screw
Back of door
Figure 44
Loading ...
Loading ...
Loading ...