Loading ...
Loading ...
Loading ...
13
5.
6.
7.
8.
7.
Insert the ventilation grille in the plinth panel.
5.
Screw the appliance to the body
of the unit at the bottom on the
left and right.
6.
Insert the foam moulding ap-
prox. 10 mm into the opening
in the appliance plinth as in-
dicated.
Important
If the foam moulding is not installed, the appliance will not
achieve its full refrigeration performance during operation.
8.
Fit the plinth panel. In doing so, the foam moulding is pushed
backwards into its nal position.
Important
The foam moulding must be touching the ventilation grille.
Loading ...
Loading ...
Loading ...