Loading ...
Loading ...
Loading ...
12
4 x 30
TX™ 15
4.
2.
3.
Installing the appliance
2.
Adjust the height of the appliance to 4 mm less than the recess
height by turning the adjustable feet clockwise.
Turn the spanner anticlockwise to raise the appliance front and
clockwise to lower it.
Position the spanner accordingly
Important
The appliance must be aligned horizontally and verti-
cally. If the appliance is not level, the main body of the
appliance can be deformed and the door will not close
properly.
3.
Slide in the appliance until the front surface of the appliance door
is ush with the unit fronts.
When sliding in the appliance, make sure that the mains
cable is not damaged!
1.
1.
Remove cover
1
.
Apply the cover strips to the leading edge of
the appliance housing on the left and right.
4.
• Screw the appliance to the
body of the unit at the top left-
hand side.
• Click cover into place again.
Loading ...
Loading ...
Loading ...