Loading ...
Loading ...
Loading ...
19
PROBLEM: PARTS
ARE DIFFICULT TO
DISASSEMBLE
Solution: After finishing juicing,
in order to detach and clean
parts more easily, continue
to run the juicer for about 30
seconds without adding any
additional food in order to
process any food that might
be stuck in the Auger and
Juicing Screen.
Another tip: after you are done
extracting juice, pouring some
water in the feed chute to clean
it can help make it easier to
disassemble.
PROBLEM:
JUICER IS STUCK
AND WON'T OPERATE
Solution: If the juicer is stuck
and not operable, press the
power switch to the “OFF”
position. Then press the
RESET switch, which is located
at the bottom of the base
(see image).
Next, press and hold the power
switch in the “REV” position
for few seconds, then try
operating again.
Troubleshooting.
If this reverse function
does not work, turn o
the machine, unplug, and
reassemble it, using the
instructions given earlier in this
guide. After reassembly, try
turning on the machine to see
if normal function has been
restored.
PROBLEM: THE JUICER
TURNED OFF IN THE
MIDDLE OF JUICING
If the motor overheats, the
juicer will turn o.
Solution: If the juicer is
overheated and stops working,
unplug it and allow it to cool
down for at least fifteen
minutes before attempting to
use again.
Loading ...
Loading ...
Loading ...