Loading ...
Loading ...
Loading ...
8
3. Open both doors again to make sure they close as easily as
you like and that they stay closed. If not, tilt the refrigerator
slightly more to the rear by turning both leveling screws to the
right. It may take several more turns.
NOTES:
■ To keep the refrigerator level, you should turn both
leveling screws the same amount.
■ On models with the leveling/roller assembly, after
adjusting the refrigerator to the desired tilt, turn the
leveling leg until it is rmly against the oor as shown.
On some models
4. Replace the base grille.
Door Aligning
If the space between your doors looks uneven, you can adjust it
using the following instructions:
1. Loosen the top hinge screws using a 5/16" socket or wrench.
2. Have someone hold the door in place or put a spacer
between the doors while you tighten the top hinge screws.
3. Replace the top hinge cover, if removed in Step 1.
REFRIGERATOR USE
Using the Controls
Your refrigerator has two controls that affect the temperature. The
Temperature control is located at the top front of the refrigerator
compartment and the Airow control is located on the back wall
of the freezer compartment.
IMPORTANT:
■ The recommended setting should be correct for normal
household refrigerator use. The controls are set correctly
when milk or juice is as cold as you like and when ice cream
is rm.
■ Wait 24 hours for your refrigerator to cool completely before
adding food. If you add food before the refrigerator has
cooled completely, your food may spoil.
NOTE: Adjusting the refrigerator and freezer temperature
controls to a colder than recommended setting will not cool
the compartments any faster.
■ If the temperature is too warm or too cold in the refrigerator
or freezer, rst check the air vents to be sure they are not
blocked before adjusting the controls.
Temperature Control (depending on model)
For your convenience, the Temperature control is preset at the
factory. When you rst install your refrigerator, make sure the
control is still preset as shown.
Recommended Setting
STYLE 1
STYLE 2
Cooling Off/On
STYLE 1
■ To turn off cooling, press and hold TEMP SETTING for 4
seconds until all lights turn ON for 1 second. To turn cooling
back on, press and hold TEMP SETTING again for 4 seconds.
STYLE 2
■ Press and hold TEMP for 3 seconds to turn cooling off.
To turn cooling back on, press and hold TEMP again for 3
seconds.
NOTE: Neither compartment will cool when the control is set to
OFF.
Adjusting the Temperature Control
If you need to adjust the temperature in either the refrigerator or
freezer compartment, use the settings listed in the following chart
as a guide.
NOTE: Except when starting the refrigerator, do not adjust the
control more than one setting at a time. Wait 24 hours between
adjustments for the temperature to stabilize.
STYLE 1
■ Press TEMP SETTING to toggle between the three LED lights
which indicate the temperature setting. Reading from left to
right, the LED in the rst position is the least cold. The LEDs
indicate increasingly colder settings as you continue to the
right until all three LEDs are illuminated.
NOTE: For the rst to third setting, only one LED of the
three LEDs will be lit. All three LEDs will be lit when you have
reached the PowerCold™ setting (the coldest setting).
STYLE 2
■ Press the TEMP button to toggle among the four LED lights
which indicate the temperature setting. Reading from left to
right, the LED in the rst position is the least cold. The LEDs
indicate increasingly colder settings as you continue to the
right until all four LEDs are illuminated.
NOTE: For the rst to fourth setting, only one LED of the
four LEDs will be lit. All four LEDs will be lit when you have
reached the coldest setting.
C
B
A
A. Bottom hinge
B. Screws
C. Leveling/roller assembly
Loading ...
Loading ...
Loading ...