Loading ...
Loading ...
Loading ...
Restoring the factory settings
o The coffee machine is programmed at the factory for Italian-
style espresso coffee and German-style regular coffee.
o If changes have been made to the settings and you wish
to revert to the default factory programming, you must
press and hold the COFFEE QUANTITY REGULATION
button for about 6 seconds when the machine is in stand-
by mode.
o All of the LEDs, except the ON / OFF button will flash for 5
seconds and after this the factory settings will be restored.
o Press the ON / OFF button to begin making coffee using the
default programming.
Using the coffee machine light
o The coffee machine has LEDs for illuminating the dispensing
compartment for easier usage and observation.
o To turn the light on, press the LIGHT button once.
Press this button once again to turn the light back
off.
o The light function is only available when the machine is turned
on and not when it is in stand-by mode.
Warnings
o The coffee machine may display a warning which prompts you to
carry out an action or alerts you to a problem with the machine.
Fill water tank warning
o The machine is equipped with a sensor which detects water in
the water tank.
o If there is no water in the tank, the fill water tank
indicator will light. The coffee machine will not function
until the water tank is filled.
o Before attempting to use the coffee machine, you
should fill the water tank by following the instructions
outlined on pages 12 – 13.
20
Loading ...
Loading ...
Loading ...