Loading ...
Loading ...
Loading ...
10 INSTALLATION
INSTALLING YOUR APPLIANCE (CONTINUED)
Applying the seal
• Clean the worktop around the cut-out area.
• Stick the single-sided adhesive sealing tape provided
around the outside edge of the underside of the hob,
ensuring that it is not stretched. The 2 ends of the
tape should join in the middle of one side. Allow
the tape to overlap by 2-3mm, trim, and press the
2 ends together.
1
2
Assemble spring clips as shown, to support unit in
benchtop.
1
2
50mm
H*
The cooktop must be installed at least 50mm from any
combustible surface.
H* - refer to rangehood manufacturers installation
instructions for minimum height from cooktop.
Loading ...
Loading ...
Loading ...