Loading ...
Loading ...
Loading ...
Key Fob Unlock, Driver Door/All First Press
This feature lets you program the system to unlock either
the driver’s door or all doors on the first push of the unlock
button on the key fob. To change the current setting,
proceed as follows:
• For vehicles equipped with the instrument cluster dis-
play, refer to “Instrument Cluster Display/Personal Set-
tings (Customer-Programmable Features)” in “Getting
To Know Your Instrument Panel” for further informa-
tion.
• For vehicles not equipped with the instrument cluster
display, perform the following steps:
1. Push and hold the lock button on a programmed key
fob for at least four seconds but no longer than ten
seconds. Then, push and hold the unlock button
while still holding the lock button.
2. Release both buttons at the same time.
3. Test the feature while outside of the vehicle by
pushing the lock/unlock buttons on the key fob with
the ignition in the lock position and the key fob
removed.
4. Repeat these steps if you want to return this feature
to its previous setting.
NOTE: Pushing the lock button on the key fob while you
are inside the vehicle will activate the vehicle security
alarm. Opening a door with the vehicle security alarm
activated will cause the alarm to sound. Push the unlock
button to deactivate the vehicle security alarm.
Programming Additional Key Fobs
Refer to “Sentry Key” in this section for further informa-
tion.
If you do not have a programmed key fob, contact your
authorized dealer for details.
Key Fob Battery Replacement
NOTE: Perchlorate Material – special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
The recommended replacement battery is CR2032.
1. If the key fob is equipped with a screw, remove the
screw. With the key fob buttons facing down, use a flat
blade screwdriver to pry the two halves of the key fob
apart. Make sure not to damage the elastomer seal
during removal.
20 GETTING TO KNOW YOUR VEHICLE
Loading ...
Loading ...
Loading ...