Loading ...
Loading ...
Loading ...
Average Fuel Economy
Shows the average fuel economy since the last reset
(pushing and holding the right arrow button as prompted
in the instrument cluster display to reset). When the fuel
economy is reset, the display will read “RESET” or show
dashes for two seconds. Then, the history information will
be erased, and the averaging will continue from the last
fuel reading before the reset.
Distance To Empty (DTE)
Shows the estimated distance that can be traveled with the
fuel remaining in the tank. This estimated distance is
determined by a weighted average of the instantaneous
and average fuel economy, according to the current fuel
tank level. This is not resettable.
NOTE: Significant changes in driving style or vehicle
loading will greatly affect the actual drivable distance of
the vehicle, regardless of the DTE displayed value.
When the DTE value is less than 30 miles (48 km) estimated
driving distance, the DTE display will change to a text
display of ⬙LOW FUEL.⬙ This display will continue until
the vehicle runs out of fuel. Adding a significant amount of
fuel to the vehicle will turn off the ⬙LOW FUEL⬙ text and a
new DTE value will be displayed, based on the current
values in the DTE calculation and the current fuel tank
level.
Tire Pressure Monitor (TPM)
Refer to “Tire Pressure Monitoring System (TPMS)” in
“Safety” for system operation.
Elapsed Time
Shows the total elapsed time of travel since the last reset.
Elapsed time will increment when the ignition is placed in
the RUN/START position.
Elapsed time is displayed as follows:
hours: minutes: seconds
Elapsed time can be reset by pushing and holding the right
arrow button (as prompted in the display). Upon reset, all
digits will change to zeros, and time will start again if the
ignition is in the RUN or START position.
Display Units Of Measure In
To make your selection, push and release the right arrow
button until “US” or “METRIC” appears.
104 GETTING TO KNOW YOUR INSTRUMENT PANEL
Loading ...
Loading ...
Loading ...