Loading ...
Loading ...
Loading ...
#
Headlight Bulb
1.
Remove the headlight bolts from the
headlight case.
2.
Gently pull the lower end of the headlight
forward and remove the headlight.
3.
Disconnect the connector.
4.
Remove the seat rubber.
5.
Unhook the pin and remove the bulb.
6.
Install a new bulb and parts in the reverse
order of removal.
u Install the seat rubber with its TOP
mark facing up.
7.
Tighten the headlight bolts.
Torque: 3.0 lbf·ft (4.1 N·m, 0.4 kgf·m)
Do not touch the glass surface with your
fingers. If you touch the bulb with your bare
hands, clean it with a cloth moistened with
isopropyl (rubbing) alcohol.
20180808121829_31MJA8100_enu_BOOK Page 97 Wednesday, August 08 2018 12:24:26 JST
Electrical Trouble u Burned-out Light Bulb
Troubleshooting
94
Connector
Headlight
Headlight bolts
Seat rubber
TOP
mark
Pin
Bulb
Loading ...
Loading ...
Loading ...