Loading ...
Loading ...
Loading ...
English - 14
Troubleshooting Guide
User Maintenance Instructions
(Continued)
Store the machine
• Store the appliance in a dry and cool indoor place, away from direct sunlight as well as
chemicals and out of reach of children.
• IMPORTANT: make sure the machine is positioned on a level surface.
• If you want to stack this appliance, stack them on their tops with the same orientation.
• Do not stack more than three units of this appliance.
PROBLEM POSSIBLE CAUSE SOLUTION
Dehumidifier does
not start
No electricity. Check for power supply.
The power cord is not properly
plugged in.
Remove and reconnect the power
cord.
Dehumidifier runs
but humidity level
does not decrease
The dehumidification system is
within startup process.
Wait for 3 minutes (180 seconds)
until the dehumidification light
stops blinking.
The humidity level setting is too
high.
Decrease the humidity level
setting.
The working area is not enclosed. Make sure the area is tightly
sealed.
There are other sources of
humidity in the room.
Remove these sources or wait until
they completely volatilize.
The humidity level has reached
the setting level.
Decrease the humidity level
setting, set to constant
dehumidification mode, wait until
the humidity level rises up again.
Clean the surface
• Use a damp cloth to wipe the surface of the housing. Do not clean the unit with water
directly.
• Do not clean the fins of the evaporator and condenser by yourself.
Loading ...
Loading ...
Loading ...