Loading ...
Loading ...
Loading ...
GB
5
INSTALLATION OF THE OVEN
To install the oven into the kitchen a cutout should be made in accordance with the
dimensions shown in the Cutout & Dimensions figure.
The apparatus is to be fastened to the top by means of the two screws provided in the
kit through the holes made on the oven uprights.
The cabinet in which the apparatus is installed shall be open on the back side to ensure
a sufficient air circulation and prevent overheating.
WARNING
As the apparatus is to be fitted in your kitchen furniture, make
sure that all surfaces in contact with the oven can resist a
temperature of approx 90°C.
Electricals
- Absorbed power:
oven top element:............................................. 3500+1000W 230V - 3500+1000W 240V
oven bottom element: ...................................... 3000W 230V - 3000W 240V
round element (hot air): .................................... 2x1300W 240V or 1x2500W 240V
(depending on model)
lamp: ................................................................ 3x25W
hot air fan motor:............................................... 2x44W or 1x44W (depending on model)
cooling fan motor:............................................. 44W
- Maximum absorbed power: (see data plate).
- Supply voltage: (see data plate).
NOTE
This appliance is in compliance with following European directives:
2006/95/CE (LVD), 2004/108/CE (EMC), 2011/65/CE (RoHS),
2012/19/UE (WEEE), 2002/40/CE.
Loading ...
Loading ...
Loading ...