Loading ...
Loading ...
Loading ...
ASSEMBLY
11
NOTE: When using string trimmer attachments, use only .080 in. diameter line.
The attachment connects to the power head by means of a coupler device.
• Loosen the attachment knob on the coupler.
• Push in the release button located on the attachment shaft. Align the button with the guide
recess on the power head coupler and slide the two shafts together. Rotate the attachment
shaft until the button locks into the positioning hole.
NOTE: If the button does not release completely in the positioning hole, the shafts are not locked
into place. Slightly rotate from side to side until the button is locked into place.
• Tighten the attachment knob securely.
REmOVINg THE ATTACHmENT FROm THE POWER HEAD
for removing or changing the attachment:
• Stop the power head.
• Remove the battery from the power head.
• Loosen the attachment knob.
• Push in the release button and twist the shafts to remove and seperate ends.
ATTACHINg THE FRONT HANDLE (See Figure 4.)
Fig. 4
Fig. 3
RELEASE BUTTON
POSITIONINg HOLE
ATTACHmENT KNOB
ATTACHmENT SHAFT
• Press the auxiliary handle onto the power head shaft so that the handle is angled toward the
rear handle that allows for comfortable operation.
• Slide the bolts through the holes in the auxiliary handle, and tighten them securely.
Loading ...
Loading ...
Loading ...