Loading ...
Loading ...
Loading ...
15
INSTALLATION
ENGLISH
Unpacking the
Appliance
Lifting the Appliance Off the
Foam Base
* This feature may vary depending on
the model
purchased.
After removing the carton and shippi
ng
ma
terial,
lift the appliance off the foam
base.
•
Make sure the tub support
a
* comes
off w
ith the base and is not stuck to the
bottom of the appliance.
•
If you must lay the appliance down
to
re
move the carton base
b
, always
p
rotect the side of the appliance and
lay it carefully on its side. Do not lay the
appliance on its front or back.
Removing the Transit Bolt
Assemblies
To prevent the appliance from severe
vibration and breakage, remove transit
bolts and retainers.
1
Starting with the bottom two transit
bolts
a
, use the spanner (included) to
fully loosen all transit bolts by turning
them counterclockwise.
2
Remove the bolt assemblies by
wi
ggling them slightly while pulling
them out.
3
Install the hole caps.
•
Locate the hole caps
b
included in
the accessory pa
ck or attached on
the ba
ck.
NOTE
• Save the transit bolts and retainers for
future use.
•
Transport this appliance fo
r the
pre
vention of breakage as below:
-
The transit bolts are reinstalled.
-
The power cord is secu
red to the
back of the appliance.
*
global_main.book.book Page 15 Wednesday, September 2, 2020 4:40 PM
Loading ...
Loading ...
Loading ...