Loading ...
Loading ...
Loading ...
14
INSTALLATION
vibration and unbalance, errors and
malfunction.
• To reduce vibration, we recomme
nd
pla
cing at least 15 mm thickness of
rubber cups
a
under each adjusting
foo
t of the appliance, secured to at
least two floor beams with screws.
• If possible, install the appliance in one
of the corners of the room, where
the
f
loor is more stable.
• Fit the rubber cups to reduce vibration.
CAUTION
• If the appliance is installed on the
unstable floor (e.g. w
ooden floor), the
warranty
does not cove
r any damages
and cost occur
red
due to the
installation on the unstable floor.
NOTE
• You can purchase rubber cups (part
No
.
4620ER4002B
) from the LG service
centre.
Ventilation
• Make sure that air circulation around
th
e appliance should not be impeded
by carpets, rugs, etc.
Ambient Temperature
• Do not install the appliance in rooms
where
freezing temperatures
may
oc
cur. Frozen hoses may burst un
der
p
ressure. The reliability of the
electronic control unit ma
y be
i
mpaired at temperatures belo
w
fre
ezing point.
• If the appliance is delivered in winter
and temperatures are below freezing,
place the appliance at room
temperature for a few hours befo
re
p
utting it into operation.
Electrical Connection
• Do not use an extension cord or
double adapter.
•
Alwa
ys unplug the appliance and turn
o
ff the water supply after use.
•
Connect the applia
nce to an earthed
so
cket in accordance with cu
rrent
w
iring regulations.
•
The appliance must be positioned so
that the plug is easily accessible.
• Power outlet must be within 1 meter of
either side of the appliance.
WARNING
• Repairs to the appliance must only be
carried out by qualified personne
l.
R
epairs carried out by inexperience
d
pers
ons may cause in
jury or serious
m
alfunctioning. Contact your lo
cal
au
thorised LG repairer.
• The power plug must be plugged
into
an
appropriate outlet socket th
at is
in
stalled and grounded/earthed
in
ac
cordance with all loca
l codes and
ordinances.
global_main.book.book Page 14 Wednesday, September 2, 2020 4:40 PM
Loading ...
Loading ...
Loading ...