Loading ...
Loading ...
Loading ...
20
Using the appliance without changing the cartridge can damage the appliance and stop its steaming performance.
Press on the anti calc button only if you have changed the cartridge.
To unsure the efficiency of the cartridge, please remove it from its plastic bag just before use. The international
guarantee will not cover any damages which occurs as a result of using the appliance without changing the cartridge
Semi-automatic self-cleaning procedure*
Never start the self-cleaning procedure when the appliance is on its base.
Always place the iron on its cleaning stand, over a sink.
Ensure that the scale collector* is installed in the iron and properly locked, prior to starting self-cleaning.
Never touch the iron or its cleaning stand during self-cleaning. The cleaning accessory may still be hot; wait at least 15
minutes before handling it.
The cleaning stand is only intended for self-cleaning.
Never use this accessory as an iron holder during normal use.
*depending on the model
PLEASE RETAIN THIS INSTRUCTION
BOOKLET FOR FUTURE REFERENCE
x3
STEAMBOOST
Environment protection first !
i
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a civic waste disposal centre.
A problem with your appliance ?
PROBLEMS CAUSES SOLUTIONS
Your iron is producing little or no
steam.
You have just filled the tank or
changed the anti-calc cartridge, or
you have just started using it.
Press the steam control button
continuously for few minutes
pointing it away from your linen, in
order to prime the pump.
There is no anti calc cartridge in
the appliance or it is not properly
installed.
Make sure the anticalc cartridge
is installed and locked in its
compartment.
Steam cannot be produced at the
temperature you have selected.
Set the thermostat control in the
coloured zone (••• or MAX).
The water tank is empty. Fill the tank.
Water runs out of the holes of the
soleplate.
You are using steam for the first
time or you have not used it for
some time.
Press on the steam control button
away from your ironing board until
the iron produces steam.
The setting is not correct (1 dot / 2
dots) and the soleplate is not hot
enough to produce steam.
Set the iron at 3 dots (••• or MAX)
and wait for the iron thermostat
light to go out before activating the
steam button again.
Loading ...
Loading ...