Loading ...
Loading ...
Loading ...
20
Leveling Unit
Once the unit is in position, height adjustment can be made from
the front. Remove access panel just below the water  lter. Using a
5/16" hex drive, turn clockwise to raise the unit or counterclockwise
to lower. Use the lowest torque setting when using a power drill.
Do not turn the leveling legs by hand. When the unit is properly
leveled, door/drawer adjustments are less likely to be necessary.
IMPORTANT NOTE: Level the unit to the  oor, not surrounding
cabinetry. This could a ect the operation of the unit, such as door
closing.
A
B
Front Panel
Left Front
Adjustment
Right Front
Adjustment
Left Rear
Adjustment
Right Rear
Adjustment
Kickplate Installation
After the unit has been adjusted to the proper height, place the kickplate on the lower front with the adjustment screws in the slots. Let the
kickplate drop until it hits the  oor. Tighten the screws.
kickplate
Front of unit
Adjustment screws
Adjustment slot
Loading ...
Loading ...
Loading ...