Loading ...
Loading ...
Loading ...
EN
©2018 Hestan Commercial Corporation
14
GAS CONNECTION - NATURAL GAS (NG)
NOTE: To ensure proper heating performance of this appliance, verify that the gas line supply
pressure is adequate. Use only the gas pressure regulator supplied with this appliance. This
regulator is set for a supply pressure of 7 inch WC (1.74 kPa) to maintain 4 inch WC (1.00 kPa)
outlet (manifold) pressure. Use a minimum 1/2” ID flex hose to prevent gas starvation. Ensure
that the service pipe supplying the side burner is fitted with a shut-off valve conveniently
positioned and easily accessible as an emergency gas shut-off.
Your Hestan Side Burner for use with Natural Gas is supplied with its own regulator which
MUST be installed. If this regulator needs to be replaced, use only the type specified by Hestan
for this appliance.
To connect the regulator follow the next steps:
1. Locate the regulator mounted underneath your Side Burner.
2. Connect gas supply using a minimum 1/2” diameter flexible (semi–rigid) stainless steel gas
hose, no more than 48” (1.22m) in length. If you plan to inter-connect the Side Burner with
your Hestan Grill, be sure to use the fittings supplied with the mounting kit, and a flexible
hose as short as possible to make the connection. The hose as well as the connectors must
comply with the
Standard for Connectors for Outdoor Gas Appliances and Manufactured
Homes, ANSI Z21.75 • CSA 6.27
, and suitable for outdoor installation. Use the appropriate
thread sealant on all connections.
3. Proceed to LEAK TESTING section.
1/2” ID FLEX HOSE,
ELBOW & NIPPLE
(SUPPLIED BY
CUSTOMER)
NAT GAS
REGULATOR
INCOMING
NAT GAS SUPPLY
SHUTOFF VALVE
(SUPPLIED BY
CUSTOMER)
HESTAN SIDE BURNER
(MODEL AGB122-NG SHOWN)
GAS AND ELECTRICAL CONNECTIONS
(continued)
Loading ...
Loading ...
Loading ...