Loading ...
Loading ...
Loading ...
16
4. PowerSensor™
4. PowerSensor™
How does it work?
• PowerSensor works on principle of
transmission and reception of harmless
“infrared” signals in order to detect user-
presence.
• When the user is in front of the monitor,
the monitor operates normally, at the
predetermined settings that the user has
set- i.e. brightness, contrast, color, etc
• Assuming that the monitor was set to
100% of brightness for example, when the
user leaves his seat and is no longer in front
of the monitor, the monitor automatically
reduces the power consumption upto 80%.
User present in front User not present
ttaW
Power consumption as illustrated above is for reference purpose only
Setting
Default settings
PowerSensor is designed to detect the presence
of the user located between 30 and 100 cm (12
and40inches)fromthedisplayandwithinve
degrees left or right of the monitor.
Custom settings
If you prefer to be in a position outside the
perimeters listed above, choose a higher
strengthsignalforoptimaldetectionefciency:
The higher the setting, the stronger the
detection signal. For maximum PowerSensor
efciencyandproperdetection,pleaseposition
yourself directly in front of your monitor.
• If you choose to position yourself more
than 100 cm or 40 inches from the
monitor use the maximum detection signal
for distances up to 120 cm or 47 inches.
(Setting4)
• Since some dark colored clothing tends to
absorb infrared signals even when the user
is within 100 cm or 40 inches of the display,
step up signal strength when wearing black
or other dark clothes.
Sensor distance Landscape/Portrait mode
ATTENTION
PowerSensor off
ATTENTION
PowerSensor off
Aboveillustrationsareforreferencepurposeonly,maynotreectthe
exact display of this model.
How to adjust settings
If PowerSensor is not operating correctly
inside or outside the default range, here’s how
to fine-tune detection:
• EnterOSDMenuScreenandpress▲or
▼buttontoselect[PowerSensor], then
press button.
• Turn the PowerSensor on.
• Select Setting 4 and press OK.
• Test the new setup to see if PowerSensor
properly detects you in your current
position.
• PowerSensor function is designed to work
inLandscapemode(horizontalposition)
only. After PowerSensor turn on it, it will
automatically turn Off if the monitor
is used in Portrait mode (90 degree/
verticalposition);itwillautomaticallyturn
ON if monitor is returned to its default
Landscape position.
Note
A manually selected PowerSensor mode
will remain operational unless and until it is
readjusted or the default mode is recalled. If
youndthatthePowerSensorisexcessively
sensitive to nearby motion for some reason,
please adjust to a lower signal strength.
Loading ...
Loading ...
Loading ...