Loading ...
Loading ...
Loading ...
18
Problem Cause Solution
The mist has a strange
smell
The device is new.
Remove the water tank, turn the screwed plug
and remove it.
Air the open, emply water tank in acool, dry place
for twelve hours.
Stale or dirty water.
Empty the base unit and the water tank and clean
them thoroughly.
Fill the water tank with fresh water.
Strange noise
The water tank is not positioned
correctly on the base unit.
Lift up the water tank and position it correctly on
the base unit.
The tank should sit tightly on the base unit.
There is too little water in the water
tank.
Fill the water tank.
The device is not level and unsta
-
ble.
Place the device on afirm, level surface.
Mist escapes underneath
the water tank
The water tank is not positioned
correctly on the base unit.
Lift up the water tank.
Check whether the join between the base unit
and water tank is clean.
Clean if required.
Position the water tank correctly on the base unit.
The tank should sit tightly on the base unit.
The LED lights up red
although the tank is full
The device evaluates the water
level incorrectly due to a fault.
Restart the device.
10. Technical data
Dimensions (LxWxH) approx. 21cm x 11cm x 25,5cm
Cable length approx. 1.5m
Mains voltage/frequency 100 – 240 V AC / 50/60 Hz
Nominal power
max. 20W
Room size up to 20m²
Capacity approx. 2litres
Evaporation output 200ml/hour
Signs and symbols
The unit is double-protected and thus corresponds to protection
class 2.
Volume
approx. 35dB
Loading ...
Loading ...
Loading ...