Loading ...
Loading ...
Loading ...
11
USING YOUR COOKTOP
a
b
a
b
a
b
a
b
IMPORTANT!
Turn the burner off (o) and see ‘Troubleshooting’ for what to do next if you
experience any of the following:
There’s a strong gas smell.
The flame has been blown out by a
draught or extinguished by a spill and
does not re-ignite.
There is no clicking/sparking or there is
clicking/sparking, but a burner or burners
won’t light.
The flames don’t burn all the way
around a burner, or some flames flicker.
The flame is yellow or yellow-tipped
rather than blue.
The flames are too large, small, irregular,
noisy or lift away from the burner.
IMPORTANT!
If a dial halo is red, the dial is not in the ‘OFF’ position.
Ensure that the burner has ignited or turn the dial back to the OFF position.
A white halo indicates that another burner dial has been turned on.
When all the dials are in the ‘OFF’ position, all the halos will turn off.
Adjusting the flame on the dual work burner
1 Always start out on High. Both rings
of flame will be on in the shaded
setting range.
Note: when turned all the way down, the
outer ring may appear to come and go.
If this occurs, adjust the dial slightly back
towards High for a stable outer ring.
2 To use the inner ring of flames only,
continue turning the dial towards Low.
Only the inner ring will be on in the
shaded setting range.
High
High
Low Low
Both rings
Inner ring only
Loading ...
Loading ...
Loading ...