Loading ...
Loading ...
Loading ...
6 |CNS E WWW.STIEBEL-ELTRON-USA.COM
INSTALLATION
TROUBLESHOOTING
aaa
26_07_31_0124
1
3
2
4
» Drill holes at all four markings. Secure the wall mounting bracket
with suitable materials (screws, rawl plugs) depending on the
type of wall. With the vertical slots, you can compensate for an
offset fi xing hole.
10.2 Appliance installation
» Hook the appliance by its slots in the back of the appliance on
to all four tabs of the wall mounting bracket simultaneously.
» Push the appliance to latch it in position.
» Turn the locking bolt in the wall mounting bracket fully clockwise;
this locks the appliance in place.
» Push the safety cap onto the locking bolt to prevent it from
loosening.
26_07_31_0035
1
2
1 Locking bolt
2 Wall mounting bracket
26_07_31_0127
1
2
3
1 Appliance
2 Safety cap
3 Locking bolt
10.3 Dismounting the appliance
» Remove the safety cap from the locking bolt.
26_07_31_0128
1
2
3
1 Appliance
2 Safety cap
3 Locking bolt
» Undo the locking bolt on the wall mounting bracket.
» Lift the appliance up slightly and pull it forwards and away from
the wall mounting bracket.
10.4 Power supply
» Ensure the on-site supply cable has an adequate cross-section.
» Ensure a socket or junction box for a permanent power supply
is installed at a distance of at least 4˝ / 10 cm from the side of
the appliance.
DANGER Electrocution!
Carry out all electrical connection and installation
work in accordance with relevant regulations.
DANGER Electrocution!
The appliance must be able to be separated from the
mains power supply by an isolator that disconnects
all poles with at least 1/8˝ / 3 mm contact separation.
DANGER Electrocution!
Do not install the appliance with a fi xed power cable.
Observe the type plate. The specifi ed voltage must
match the mains voltage.
11. Troubleshooting
The power cable must only be replaced by a contractor using our
original spare parts.
12. Appliance handover
Explain the functions of the appliance to the user. Draw special
attention to the safety information. Hand the operating and
installation instructions to the user.
INSTALLATION
Loading ...
Loading ...
Loading ...