Loading ...
Loading ...
Loading ...
7
Technical Specifications
Power Output
32 Ohm Load 500mW
100 Ohm Load 500mW
250 Ohm Load 500mW
600 Ohm Load 500mW
Output Load Impedance
32 , 100 , 250 , 600
Rated Power Band
20Hz to 20kHz
Total Harmonic Distortion
0.5%
Dynamic Headroom
1dB 8 ohm load
1.3dB 4 ohm load
Frequency Response
+0, -0.5dB from 20Hz to 20,000Hz
Input Sensitivity (for rated output)
1.0 Vrms Unbalanced
2.0 Vrms Balanced
A-Weighted Signal to Noise Ratio
94dB unbalanced
Voltage gain
12dB 32 Ohm
17dB 100 Ohm
21dB 250 Ohm
25dB 600 Ohm
Trigger Output
12VDC, 50mA maximum
Power Requirements
Refer to the rear panel of the MHA200 for the
correct Voltage. The MHA200 is factory conīægured
for one of the following AC Voltages:
100 Volts, 50/60Hz at 50 watts
110 Volts, 50/60Hz at 50 watts
120 Volts, 50/60Hz at 50 watts
220 Volts, 50/60Hz at 50 watts
230 Volts, 50/60Hz at 50 watts
240 Volts, 50/60Hz at 50 watts
Standby Power, less than 0.5 watts
Field AC Voltage conversion of the MHA200 is not
possible.
Dimensions
Width 6-1/8 inches (15.6cm)
Height 5-3/4inches (14.6cm) including feet
Depth 9-1/8 inches (23.2cm) including antenna
Weight
10.5 pounds (4.8 kg) net
12.0 pounds (5.5 kg) in shipping carton
Shipping Carton Dimensions
Width 12 inches (30.5cm)
Height is 10 inches (25.4cm)
Depth is 9-1/2 inches (24.1cm)
Loading ...