Loading ...
Loading ...
Loading ...
Reversing the Door
1. Open the door and release the tension on the hinge
spring by using the T20 bit provided to turn the screw
from | to O.
2. If the air separator is attached, remove it. Remove the
2 mounting bolts at the top and bottom of the door (1).
Remove the door (2) and lay it aside on a protected
surface.
bottom hinges, remove the hinges, and lay the parts
aside.
screws (1) and remove the front cover assembly (2).
top of the appliance. Swap the positions of the 2
brackets, rotating one 180 degrees, and reinstall the
bolts.
bracket assembly on the opposite side.
WARNING
Risk of Injury
Before working on the hinge, release the tension on the
hinge spring.
NOTE:
the door MUST be supported while removing or
installing mounting bolts.
Loading ...
Loading ...
Loading ...