Loading ...
Loading ...
Loading ...
✎
■
If your wireless router supports DHCP, this player can use a DHCP or static IP
address to connect to the wireless network.
■
Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.
■
The player supports only the following wireless security key protocols:
-
WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
■
Select a channel on the wireless router that is not currently being used. If the
channel set for the wireless router is currently being used by another device
nearby, it will result in interference and communication failure.
■
In compliance with the newest Wi-Fi certification specifications, Samsung Blu-ray
players do not support WEP, TKIP, or TKIP-AES (WPS2 Mixed) security encryption in
networks running in the 802.11n mode
.
■
Wireless LAN, by its nature, may cause interference, depending on the
operating conditions (router performance, distance, obstacles, interference by
other radio devices, etc).
Settings
●
The Home screen will not
appear if you do not configure
the initial settings.
●
The OSD (On Screen Display) may
change in this player after you
upgrade the software version.
●
The access steps may differ
depending on the menu you
selected.
●
After the initial settings process
is complete, you can then
operate the panel buttons and
remote control.
After you have connected the player
to your TV, turn on the TV and player.
When you turn on the player the
first time, the player's Initial Settings
screen appears on the TV. The Initial
Setting procedure lets you set the
On Screen Display (OSD) and menu
languages, the aspect ratio (screen
size), the network type, and connect
the player to your network.
To run the Initial Settings procedure,
follow these steps:
Plug in the Blu-ray player, turn on
your TV, and then turn on the Blu-
ray player by pressing the
button on the remote. The Initial
Settings Language screen appears
.
>
"
Initial Settings I On-Screen Language
Select the desired language, and
then press the
v
button. The
Start screen appears.
a
"
Press the
v
button. The TV
Aspect screen appears.
On the TV Aspect screen, select the desired
TV Aspect Ratio, and then press the
v
button. The Network screen appears
.
✎
■
An explanation of each Aspect Ratio
appears on the screen. Highlight
each choice to see each explanation.
If you have an HDTV, we suggest
you choose 16:9 original.
If you have connected a LAN
cable to the Blu-ray player, Initial
Setup defaults to Wired Network.
Loading ...
Loading ...
Loading ...