Loading ...
Loading ...
Loading ...
Coin Meter
3.3
8. Press START, a two digit day number (“0d”) for which the start day(s) of the week for promotion
#1 will be displayed. (01=Sunday, 02=Monday, ...07=Saturday, 08=All days, 09=Monday-Friday
only, 0A=Saturday and Sunday only, 00=promotion is inactive.) Edit this number using the
DELICATE button to cycle through the allowed values.
9. Press START, the Hours and Minutes in 24 hr format for the start of Promotion #1 will be
displayed (hh.mm). Edit these values using the COLD, WARM, HOT, and DELICATE buttons.
10. Press START, the promotion percentage discount will be displayed as two digits (%%).The
discount can range from “00” = 0% to “A0” = 100% (e.g. Free Wash). Edit this number using the
HOT and DELICATE buttons. Note, pressing the HOT button ten times will cycle the value to
“A0”.
11. Press START to save the changes and exit Register “71”
12. Navigate to Register “72” (RTC Promotion #1 END”). This will allow you to set the end time for
promotion #1.
13. Press START, the promotion end time in hours and minutes in 24 hr format will be displayed (hh.
min). Edit these values using the COLD, WARM, HOT, and DELICATE buttons.
14. Press START, this will save the changes and exit register 72.
15. Program the three other Promotion times and percentages as desired using register pairs: 073 &
074 (Promotion #2), 075 & 076 (Promotion #3), and 077 & 078 (Promotion #4). Each promotion
can have a different percent reduction. They must not overlap with each other.
16. Exit Service Mode.
PROMOTION PRICING VIA EXTERNAL CLOCK-DRIVEN RELAY OR SWITCH
This washer can apply a Promotion price discount using an external clock-driven relay or manual
switch. To use this feature the washer requires an optional external price reduction harness kit be
installed. Refer to the product installation manual for information regarding connecting this signal to
the washer to activate discounts.
1. Navigate to Register 79 (Promotion %% for discount input signal) as explained in the Service
Mode section.
2. Press START the promotion percentage discount will be displayed as two digits (%%).The
discount can range from “00” = 0% to “A0” = 100% (e.g. Free Wash). Edit this number using the
HOT and DELICATE buttons. Note, pressing the HOT button ten times will cycle the value to
“A0”.
3. Press START, this will save the changes and exit register 79.
4. Exit Service Mode.
When the external signal is activated, the washer will apply a promotion percentage discount, set in
register 79, to the displayed vend price.
Please contact Laundrylux’s Technical Support team at (516) 371-0700 if you have any questions or
need assistance with price programming or implementing discount price programming.
Loading ...
Loading ...
Loading ...