Loading ...
Loading ...
Loading ...
9 10
Switching Modes
Note: Make sure the power switch on the side of the V300 is turned on before use.
The pause function switches the V300 from the operating mode to the
selected mode, and it can be paused by the following operations:
Sleep mode means that the V300 is stopped and the indicator light is off. If the
V300 is not active for 10 minutes, it will enter Sleep mode automatically.
Press on the remote controller to wake it up.
Note
: If the V300 is out of service for a long time, please turn the power switch off.
Press on the remote control to pause it.
Under the Standby mode, press on the V300 or on the remote
control to start the robot.
Start
Pause
Wake Up
Cleaning Modes
The Tesvor V300 will perform the Smart Cleaning according to your home
environment.
Click the Smart Cleaning icon on the app or press on the remote control
to start cleaning under the Smart Cleaning mode.
Tesvor V300 intensively cleans a specific area in a spiral pattern, useful if there is a
concentrated area of dust or debris. When in the Spot Cleaning mode, the V300
will stop cleaning after 2 minutes.
Click the Spot Cleaning icon on the app to start cleaning under the Spot
Cleaning mode.
The Tesvor V300 reduces its speed when it detects a wall and then follows the wall
to ensure the edge is cleaned thoroughly.
Click the Edge Cleaning icon on the app or press on the remote control to
start cleaning under the Edge Cleaning mode.
1. Smart Cleaning
2. Spot Cleaning
3. Edge Cleaning
Loading ...
Loading ...
Loading ...