Loading ...
Loading ...
Loading ...
16 EN
Listen to FM radio
Tune to a radio station
1 Press TUNER to select FM.
2 Press / to tune to a specic
frequency.
» Play starts automatically.
Tip
• You can press MODE/SCAN to tune to the next
station with strong reception automatically.
Program radio stations automatically
You can program a maximum of 30 preset
radio stations (FM).
1 In the tuner mode, press and hold
MODE/SCAN to activate automatic
program mode.
» All available stations are programmed.
» The rst programmed radio station is
broadcast automatically.
Program radio stations manually
Note
• You can program a maximum of 30 preset radio
stations.
1 Tune to a radio station.
2 Press PROG to activate program mode.
3 Press / to allocate a number (1 to 30)
to this radio station, then press PROG to
conrm.
» The preset number and the frequency
of the preset station are displayed.
4 Repeat the previous steps to program
other stations.
Note
• To overwrite a programmed station, store another
station in its place.
Select a preset radio station
1 In tuner mode, press / to select a
preset number.
Tip
• Position the antenna as far as possible from TV, VCR, or
other radiation source.
• For optimal reception, fully extend and adjust the
position of the antenna.
FM stations with RDS
Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations.
If you listen to a FM station with RDS signal,
"RDS" displays.
Display RDS information
1 Tune to the desired RDS radio station on
the FM waveband.
2 Press RDS/DISPLAY on the remote
control repeatedly to switch through the
following information (if available):
• Radio text message
• Program type (for example: News,
Sport...)
• Frequency
• Stereo/Mono Mode
• Time
• Date
Note
• [NO Radio Text], [NO PTY], [NO Name], [Mono],
[00:00:00] or [0-0-0000] displays if no RDS signal is
available.
Loading ...
Loading ...
Loading ...