Loading ...
Loading ...
Loading ...
instrucciones
nuwavenow.com
32 33
SPANISH
nuwavenow.com
INSTRUCCIONES
32 33
Panel Display Chart
Press Button Temperature Panel Display Examples
Low 100°F / 38°C 100F / 38C Warm
Med/Low 175°F / 79°C 175F / 79C Simmer
Med 275°F / 135°C 275F / 135C Steam
Med/High 375°F / 191°C 375F / 191C Stir/Deep-Fry
High 425°F / 218°C 425F / 218C Boil/Saute
Max/Sear 575°F / 302°C SEAR Sear
The minimum is 100F (38C) while the maximum temperature
reaches 500F (260C).
Nota: No retire ollas y sartenes durante el proceso de cocción. Si es
necesario, presione “Pausa / Borrar” para pausar antes de quitar.
Error Message: Solution(s):
E1
An E1 reading typically means the PIC Gold
does not detect cookware on its surface. This
can occur for one of two reasons:
1. The induction coils contained within the
PIC Gold will only work when they are in
direct contact with a piece of cookware. To
maintain your appliance’s effectiveness,
always ensure that it rests on a flat surface
and that contact is consistent with your
cookware.
2. An E1 message may also occur if the
chosen cookware is not induction-ready.
E2
The PIC is malfunctioning.
Contact Customer Service.
E3
The PIC’s voltage is too low.
Minimum = 85 volts
E4
The PIC’s voltage is too high.
Maximum = 144 volts
E5
The PIC is malfunctioning.
Contact Customer Service.
E6
The PIC is malfunctioning.
Contact Customer Service.
E7
Overheating, or air ventilation is obstructed.
If internal temperature exceeds 230F (110C),
operation will cease, and the PIC will beep. Press
Pause/Clear twice. Wait for the PIC to cool.
E8
Overheating, if PIC exceeds a temperature 20F
(-7C) higher than sear, the appliance will turn
off. Contact Customer Service.
E9
The PIC is malfunctioning.
Contact Customer Service.
FULL
In programming mode, when the total entered
time reaches the appliance’s limit of 99:60, no
additional stages can be inputted.
• When any of the above error messages are displayed on the LED,
the PIC will beep at least once.
• The fan will run up to a maximum of 60 seconds after pressing
“Pause/Clear” once. Continue cooking by pressing “Start” within
45 minutes.
Loading ...
Loading ...
Loading ...