Loading ...
Loading ...
Loading ...
1
Check ifthe water tank contains enough fresh drinking
water. Switch onmachine. Power button starts blinkingred
while machine is heating up for approximately 40 seconds.
Afterwards power button lights steady green. Machine is
ready to use.
2
Adjust drip tray position. Place cupwith correct cup size on
drip tray. See 3. "BEVERAGEEXAMPLES" or package.
3
Open locking handle. Pull out capsule holder. Make sure
rinsingtool is not inside. Insert capsule in capsule holder.
Insert it back into machine. Close locking handle.
4
Pushselectionlever to the "HOT" or "COLD" position as
recommendedon capsule packs. Beverage preparation
starts.
STOP
5
Stay beside the machine throughout the preparation!After
reaching the desired level push selection lever to the
“STOP” position. Machine stops preparation.
6
After finishing preparationthe power button blinks red for
about 5 seconds. During that time do not open locking
handle!
7
After extraction is finishedremove cup from drip tray.
8
Open locking handle. Pull out capsule holder. Remove used
capsule. Put usedcapsule industbin.
9
Rinse capsule holder with freshdrinkingwater from both
sides. Dry capsule holder. Insert it back into machine.
Enjoy your beverage!
9
6. PREPARING A BEVERAGE
6. 1 ONE CAPSULE (E. G. LUNGO)
Loading ...
Loading ...
Loading ...