Loading ...
Loading ...
Loading ...
1
Rinse water tank manually with freshdrinkingwater. Fill
water tank with freshdrinking water. Insert water tank into
machine.
2
Open locking handle. Make sure that rinsing tool is in cap-
sule holder and capsule holder is inmachine. Close locking
handle. Place an empty large container underneath the cof-
fee outlet.
4
Switch on machine. Power button starts blinking red while
machine is heating up for approximately 40 seconds. After-
wards power button lights steady green. Machine is ready
to use.
STOP
3
Make sure that the selection lever is in “STOP” position.
Ensure to use the correctmains voltage as givenin 2. “
MACHINE OVERVIEW” onpage5. Connect power plugto
mains power socket.
5
Pushselectionlever to the "COLD" position. Machine starts
rinsing.
STOP
6
After approximately 60 seconds pushselection lever to the
“STOP” position. Machine stops rinsing. Power button
blinks redfor about 5 seconds.
7
Pushselectionlever to the "HOT" position. Machine starts
rinsing.
STOP
8
After approximately 60 seconds pushselection lever to the
“STOP” position. Openlockinghandle. Pull out capsule
holder. Remove rinsing tool. Reinsert capsule holder.
9
Empty container. Fill water tank with freshdrinkingwater.
Insert water tank into machine. Place dripgrid ondrip tray.
Then insert drip tray at desired position.
8
5. FIRST USE
Loading ...
Loading ...
Loading ...