Loading ...
Loading ...
Loading ...
41
EN
Care and cleaning of the appliance
To preserve its appearance, we recommend cleaning the cooking surfaces after each use.
Where the unit is exposed to the elements, we strongly recommend the optional cover.
Other surfaces must be maintained regularly to protect the unit from tea staining and rusting.
ATTENTION
Make sure the barbecue is turned off and has cooled down before executing the instructions
shown below.
Cleaning of cooking parts
• Remove from the grill and from the cooking burners all the solid materials and the excess
grease using a scraper or a metal brush with brass bristles
• Use a clean, dry cloth to make sure all surfaces are dry.
Other stainless steel surfaces
WARNING
Do not use caustic or abrasive detergents, steel wool or metal scrapers on these stainless steel
surfaces because they can scratch and permanently damage the barbecue.
• Wash all stainless steel parts, including the thin cover, high cover and control knobs, with a
soft cloth and warm soapy water
• Clean the surfaces, making sure to rub/dry in the direction of the grain in order not to
damage the stainless steel.
• The inside of the barbecue can be cleaned with a soft cloth soaked in warm soapy water.
The front panel/tray placed inside can be removed for an easy cleaning.
• Use a clean, dry cloth to make sure all surfaces are dry.
• VERY IMPORTANT! After drying, finish off the process with 3M™ Stainless Steel Cleaner
and Polish or similar product in order to protect the stainless steel surface from corrosion
and give it a polished shine.
Cleaning the cooking grills made of cast iron
• Clean with an adequate brass bristle brush. If necessary, remove from barbecue, wash with
warm soapy water, rinse with water and dry carefully.
Important: After cooking and cleaning, the cast-iron grids should be oiled. Apply a thin
layer of vegetable oil using a cloth or brush. Afterwards, use a cloth to rub the cookware as
if you want clean the oil you just placed on it.
WARNING
Pay particular attention (especially when cleaning the knobs and around the knobs) to avoid
water and soap residue from entering the control panel containing the valves or in the burners.
Also, be careful not to touch the ignition electrode and thermocouple. There must be 3 mm
of space between the electrode and the burners (see drawing on the next page). If the unit is
exposed to the elements we recommend you use the optional vinyl cover.
Cleaning and care
Loading ...
Loading ...
Loading ...