Loading ...
Loading ...
Loading ...
6
. Load Head Assembly by inserting hose into post.
. Insert Head Assembly into post.
. Control knob should be above decal on post.
. Attach Head Assembly to post, and loosely install four
small bolts.
. Tighten bolts securely.
(For models with Entire Reflector , skip to Step 9)
Step 8 – Install Reflector
WARNING
Remove protective cover before assemble.
Note: If necessary for proper alignment of reflector
sections, loose each screw prior to further assembly and
retighten after sections are aligned.
. Slide two Reflector
Panels together.
. Insert one Small
Screw.
. Slide one Small Flat Washer over threaded end of
screw and screw on Cap Nut loosely.
. Slide Reflector Plate
onto Reflector Panels.
. Insert one Small
Screw.
. Slide one Small Flat
Washer over threaded
end of screw and
screw on Cap Nut
loosely.
. Repeat procedure to complete the assembly of all four
sections.
. Fully tighten all of the screws in the rolled edge.
9 Req’d Small Screw s
9 Req’d Cap Nuts
9 Req’d Small Flat Washers
Loading ...
Loading ...
Loading ...