Fellowes 3229901 Air Purifers

User Manual - Page 4

For 3229901.

PDF File Manual, 16 pages, Read Online | Download pdf file

3229901 photo
Loading ...
Loading ...
Loading ...
ENGLISH
Model 99Ci
Press and hold forward ( )
2-3seconds
2
4
PRODUCT MAINTENANCE
CLEANING AUTO-START INFRARED SENSORS
Paperdetectionsensorsaredesignedformaintenancefreeoperation.However,onrareoccasionsthesensors
maybecomeblockedbypaperdustcausingthemotortorunevenifthereisnopaperpresent.
(Note:twopaperdetectionsensorsarelocatedinthecenterofthepaperentry).
Allcross-cutshreddersrequireoilforpeakperformance.Ifnotoiled,a
machinemayexperiencediminishedsheetcapacity,intrusivenoisewhen
shreddingandcouldultimatelystoprunning.Toavoidtheseproblems,we
recommend you oil your shredder each time you empty your waste bin.
OILING SHREDDER
15
*Only use a non-aerosol vegetable oil in long
nozzle container such as Fellowes 35250
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
*Apply oil across entry
18
1
TO CLEAN THE SENSORS
1
Turn off and unplug
shredder
LocateAuto-start
infared sensor
Dip cotton swab in
rubbing alcohol
Usingcottonswab,wipe
away any contamination
from the paper sensors
18
43
18
2
15
TROUBLESHOOTING
Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum operating temperature and needs to cool down. This indicator
will remain illuminated and the shredder will not operate for the duration of the recovery time. See Basic Shredding Operation for more information about the
continuous operation and recovery time for this shredder.
Bin Full: When illuminated, the shredder waste bin is full and needs to be emptied. Use Fellowes waste bag 36053.
Bin Open: The shredder will not run if the bin is open. When illuminated, close the bin to resume shredding.
Remove Paper: When illuminated, press reverse ( ) and remove paper. Reduce paper quantity to an acceptable amount and refeed into paper entry.
SafeSense
®
Indicator: If hands are too close to the paper entry, the SafeSense
®
indicator will illuminate and the shredder will stop shredding. If SafeSense
®
is active for 3 seconds, the shredder will automatically turn off and the user must press the power button on the control panel to resume shredding.
Loading ...
Loading ...
Loading ...