Loading ...
Loading ...
Loading ...
19
EN
Chimney Installation
1 2
Put the upper chimney into lower
chimney .Then pulling out the upper
chimney upwards. Adjust to reach the
height required.
Sliding the chimney to adjust the
chimney height. When the height you
required is reached, then hang the xing
hole to the xing screws as showed in
picture.
Installation (Vent inside)
If you do not have an outlet to the outside, exhaust pipe is not required and the
installation is similar to the one show in section “Installation (Vent outside)”.
Installing the Carbon Filter
Note: Carbon Filter is not standard accessory, these can be purchased as an
accessory.
1 2
Activated carbon lter can be used to
trap odours.
In order to install the activated carbon
lter, the grease lter should be
detached rst. Press the lock and pull it
downward.
Loading ...
Loading ...
Loading ...