Loading ...
Loading ...
Loading ...
23
EN
TROUBLESHOOTING
Error Possible cause Solution
After plugging in and
pressing the on button,
the unit does not start.
The current uctuates. Make sure that the correct voltage is
applied.
The fuse is blown. If the problem cannot be solved,
contact customer service.
The plug is not inserted correctly.
During normal
operation, heating is
interrupted and a beep
sounds.
Incompatible cookware or no
cookware on the hotplate.
Only use cookware that is suitable for
induction stoves.
Cookware was not placed in center of
hob.
Place the cookware in the center of
the hob.
Cookware is hot but has been removed
from the stove several times.
Place the cookware in the center of
the hob.
Nothing happens,
although the device is
switched on.
The cookware is empty or the
temperature is too high.
Use the correct settings.
The air inlet/outlet valve is clogged. Clean the valves. Allow the unit to cool
and restart.
The unit has been running for 2 hours,
but no input has been made.
Set a cooking mode or the timer.
Error codes
E0 Internal problem with the circuit
If error codes E1, E2 and E7 are
displayed, check whether the cookware
is suitable for induction stoves. Let
the appliance cool down and then
restart it. If error codes E0 or E3-E6 are
displayed, contact a specialist company
and have the appliance checked.
E1 Incompatible cookware or no
cookware on the hotplate.
E2 The unit is overheated
E3 Power voltage is too high.
E4 Power voltage is too low.
E5 Short circuit
E6 Short circuit
E7 The board is overheated.
Loading ...
Loading ...
Loading ...